Show explorer

The view Show explorer allows you to manage all the show items. This view has a side panel where all the different items are stored (see more at the side panel section). The item in the side panel are stored in tabs :

• Show tab : General parameters of the show.
• Kapta tab : List of all the Kaptas that have been connected to the show and their parameters.
• Trackers tab : List off all the tracker and their properties.
• Targets tab : List of all the Targets of the show and their properties and parameters.
• Kore tab : Option and parameters relative to the IA.
• Timecode tab : Timecode options and parameters.
• BeaKon tab : BeaKon options and parameters.

To create a Show explorer view, check the Layout organization section.

Show

The show tab regroups all de general parameters of the show.

Name	Description	Image
Show name textfield	You can change the name of the show here. See the show name section for more information.
Enable recorder toggle	Allows you to enable / disable the recorder button located on the side bar. See the record button section for more information.
Record JPEG toggle	In order to reduce delay, the Kaptas do not compress the images before sending them. This is why it is important to allow each Kapta has a proper GbE connection. In order to reduce space, you can choose to compress the images to JPEG when recording. We recommend to keep this parameter On as the contrary will quickly result in .kramera files with a size of tens of GB.
JPEG compression	You can choose the JPEG compression factor.
Hide Trackers distance	Kratos displays the Kapta images distorted to show the maximum information possible as undistorted images cut parts of the original image taken by the camera. As the distortion effects present in the side of the images can create weird artifacts when displaying Trackers, the Trackers can be hidden when approaching the side of the images. This parameter goes from 0 to 1 with : 0 : The Tracker will be hidden in the distorted image when it exceeds the undistorted image taken with alpha = 0. x : Same as 0 plus x time the size of the undistorted image in pixels.
2D detections toggle	The 2D detections represent all the persons detected by the IA in each image of each camera, frame by frame.
2D tracks toggle	The 2D tracks are the calculations made to keep the identity of a same person from a frame to another, and thus maintain its identity and filter out false positives.
3D detections toggle	The 3D detections are the result of the association and triangulation of each pair of camera's 2D tracks put together.
3D detection combined toggle	The 3D detection combined allows you to see the 3D detection combined in each camera view.
Tracker color toggle	This option allows you to choose if you want to display the Trackers with a color or in plain white in the Kapta and in the Target patcher views. This can be useful to reduce the amount of information displayed in the Kapta view.

The detections and tracks are only shown in the thermal cameras images.

These information can be useful to debug the detection and tracking algorithms. We suggest to activate them at the beginning of the installation of the system to check if the IA works properly.

Kapta

The Kapta tab allows you to interact with all the Kaptas connected to Kratos.
The list in the side panel displays all the Kaptas that have been connected to the current Show. You can interact with the selected Kapta's parameter in the main view.

To select a Kapta, click on its card on the list. You can also select a specific camera and have access to its parameters by clicking on the corresponding card.

Name	Description	Image
Refresh button	You can refresh the list using the "REFRESH" button at the bottom of the Kapta list.
Calibration button	This button opens-up the Calibration windows of the selected Kapta. See more at the Kapta Calibration tutorial.
Export button	You can export the calibration of the selected Kapta in the form of a .json file as a backup.
Import button	You can calibrate a Kapta by importing a .json file that contains the calibration data.

All the Kaptas parameters other than the ones relative to calibration are only accessible in Dev Mode

You can active the Dev Mode in the show parameters menu.

Name	Description	Image
Enable Kore toggle	If disabled, the video stream of the Kapta will not be send to the IA
Kapta temperature	Displays the temperature of the IR floodlights of the Kapta. This temperature drives the speed of the Kapta's fans : t < 30°C : the fan speed is set at 50% (noise 38dB(A)) 30°C < t < 50°C : the fan speed will ramp up until 100% t > 50°C : the fan speed is set at 100% (noise 53 dB(A))
ID dimmer slider	You can change the intensity of the IR floodlights of the Kapta here.
Force open shutters button	Kapta opens its shutters automatically when it connects to Kratos. If for some reason a shutter is not opened when the Kapta is connected, you can force it to open with this button.
Force close shutters button	Kapta closes its shutters automatically when it is disconnected from kratos. If you want to close the shutters without disconnecting the Kapta, you can use this button. You need to check the "I know what i'm doing" checkbox before accessing this button.

The other parameters are development tools and should stay untouched.

By clicking on a camera card in the Kapta list, you can access to the parameters of the selected camera. The parameters are set by camera.

Card	Corresponding camera
	Near InfraRed (NIR) Left camera
	Thermal Left camera
	Visible light Central camera
	Near InfraRed (NIR) Right camera
	Thermal Right camera

Trackers

The Tracker tab allows you to monitor every Tracker.
A tracker is spawned and assigned for every person detected by the IA if the following conditions are met :

• The person is in a Spawning area (see the Action area view).
• A Tracker is available. A maximum of 16 Trackers can be assigned by the IA. If all the Trackers are already assigned to people, the IA will not be able to spawn and assign any new Tracker for a new person entering the stage. To be sure that the IA will assign Trackers to persons of interest, you have to place Spawning and Tracking areas in a way that the IA will not assign a Tracker to a person that is for example backstage or in the public (more info in the Action area view).

The Tracker tab is only accessible in Dev Mode

You can active the Dev Mode in the show parameters menu.

Name	Description	Image
Create Tracker button	At the bottom right of the view, this button allows you to create a new Tracker. You can create more than 16 Trackers bu this will not make the AI assign more than 16 Trackers (the other ones will be unused).
Delete Tracker button	At the top right of the view, the trash icon allows you to delete the selected Tracker.
Kill Tracker button	You can kill a Tracker that will set his validity to 0 and make it disappear.
Tracker Color textfield	You can change the color of a Tracker with the appropriated textfield. Color is expressed in a Hex code.
Tracker Validity	The validity of a Tracker is a value from 0 to 100 and is determined by the IA in function of the confidence it has about the presence of a person.
Tracker transformations	You can check the Tracker's position, speed, acceleration, and orientation.

We recommend to not interact with the Tracker tab as it is mainly a development tool.

Targets

The Target tab allows you to interact and manage all the Targets of your show.
The list in the side panel displays all the Targets. You can interact with the selected Target's parameter in the main view.

Name	Description	Image
Create Target button	At the bottom right of the view, this button allows you to create a new Target.
Delete Target button	At the top right of the view, the trash icon allows you to delete the selected Target.
Unused buttons	Greyed out buttons are development tools and have no function at the moment.

All the Target's parameters and how to interact with them are explained in the Target management tutorial.

Kore

Parameters relative to the connection with the IA.

This tab has no use outside of Kore servers.

Name	Description	Image
Restart button	You can restart the IA if you experience problems with it.
IP and port textfields	Kratos connects to the IA locally via network (127.0.0.1). The standard port is 9997.
Enable BeaKon tag toggle	Allows the BeaKon system information to be send to the Kore. If disabled, the BeaKon system will have no purposes.

We recommend to not interact with the Kore tab as it is mainly a development tool.

Timecode

The timecode tab allows you to manage the Timecode parameters of the show.
Kratos is able to listen to timecode, save it during recording of .kramera files, and play back .kramera files in synchronization with the timecode input.

Name	Description	Image
Timecode toggle	Allows you to enable / disable the timecode input of Kratos.
Timecode framerate textfield	You can set the Timecode framerate (in fps).
Timecode source status	Readings and status of the Timecode source.
Timecode source input	You can choose the Timecode source input here.
Timecode for recorder toggle	If enabled, and if the timecode input is enabled, the timecode received will be save to .kramera files during recording.
Timecode for playback toggle	If enabled, and if the timecode input is enabled, .kramera files that have been recorded with timecode can be played back in synchronization with the timecode input. To select the file that will be played, go to the BeaKon tab.

Be careful to keep the "Timecode For Recorder" option disabled if you don't have a timecode source. Otherwise the recording of .kramera files will fail.

BeaKon

This tab allows you to interact with the beaKon server and manage all the BeaKon parameters.

The BeaKon system is managed by a separate server (called BeaKon server). Kratos can connect to it via network to receive information and send this information to the IA.

Name	Description	Image
Import config button	At the moment, the BeaKon kit configuration has to be done by writing a configuration file manually. Use this button to import the configuration once the file is written.
Clear tags and anchors button	This will delete all the tags and anchors saved in Kratos and in the BeaKon server. You will need to re-import a config file and reconnect the tags and anchors to the BeaKon server.
Enable BeaKon toggle	Enable / Disable any communication with the BeaKon server(s).
Logs toggle	If enable, the logs between Kratos and the BeaKon server will be displayed on the Message view.
Debug Report toggle	If enabled, the BeaKon server logs will be saved on .kramera files when recording.
Main / Spare server switch	Kratos can connect to 2 BeaKon servers simultaneously. You can fill in the Ip addresses of the main and the spare server, and choose which one to listen to here.
Update rate selection	You can change the update rate of the tags here.
Tag Kit selection	Kratos can manage 2 tag kits (called A and B), you can choose which one to use here. If no kit is selected, all the tags turned on will be used.
Playback delay	If a tag is lost, Kratos can use its position from a .kramera file that has previously been recorded. This is useful in case of a emergency when a tag doesn't respond anymore. You have to preform the show before with the same tag and record a .kramera file (with timecode) before using this feature. You can choose the time period necessary to determine that a tag is lost here.
Legacy filter toggle	Development tool, should stay untouched.
Coordiates offset	If the BeaKon system has not been calibrated in the same coordinate system that Kratos uses, you can offset the position received from the BeaKon server here.
Position noise too big textfield	Development tool, should stay untouched.
Play annotation as tags toggle	If you have an annotated .kramera file, you can emulate tags with the annotations of this file.
Anchor LED toggle	You can turn on or off the status LEDs of the anchors with this button.
Playback file selection	You can select here the .kramera file that will be played if the "Timecode for playback" option has been enabled in the timecode tab.
Delete tags button	This button will delete all the tags from Kratos and from the BeaKon server.
Delete anchors button	This button will delete all the anchors form Kratos and from the BeaKon server.